LMV7271MG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7271 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.5V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 1nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7271MG Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 for ease of transportation.Output type CMOS, Push-Pull, Rail-to-Rail is used for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.In total, it contains 1 elements.The device contains 5 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 5 .In case you are looking for more pin-to-pin solutions, you may want to search LMV7271 .The comparator presents a quiescent current of 14μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 14μA .If the current supply exceeds 14μA , the comparator might be damaged.A maximum current of 1nA can be supplied to the device.Comparator electronics is necessary to have a voltage of 5V for normal operation.Packed in TR , this device is for general uses (often in ADC circuits).
LMV7271MG Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7271MG Applications
There are a lot of Texas Instruments LMV7271MG linear comparators applications.
- System control and monitoring
- Point of load regulators
- Mobile Phones
- Portable and Battery-Powered Systems
- Handheld Instruments
- Notebooks and PDAs
- Metering Systems
- Limit Comparators
- Mobile Communications
- Power Supervision
