LMV7271MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7271 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 9μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 10μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7271MG/NOPB Overview
For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .This package has been designed with Tape & Reel (TR) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator families.With a voltage of 1.8V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.The device is equipped with 5 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 5 pins.You may wish to search LMV7271 for more solutions that address your specific needs.The comparator presents a quiescent current of 10μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 14μA .An excess of current supply over 9μA could result in malfunction of the comparator.Electronic comparator is possible to input up to 10nA current into the device.Normal operation requires 5V operating supply voltage.Packed in TR , this device is for general uses (often in ADC circuits).
LMV7271MG/NOPB Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 10μA
LMV7271MG/NOPB Applications
There are a lot of Texas Instruments LMV7271MG/NOPB linear comparators applications.
- RC Timers
- Analog front end
- Laptop Computers
- Battery management and protection
- Power Supervision
- Automotive
- High-Speed Sampling Circuits
- Point of load regulators
- Security Detection Systems
- Appliances
