Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Copper, Silver, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFBGA |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BICMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Base Part Number |
LMV7272 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Operating Supply Current |
27μA |
Nominal Supply Current |
27μA |
Max Supply Current |
27μA |
Propagation Delay |
2.1 μs |
Quiescent Current |
14μA |
Response Time |
1800 ns |
Common Mode Rejection Ratio |
78 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Supply Type |
Single |
Input Offset Voltage (Vos) |
4mV |
Average Bias Current-Max (IIB) |
0.1μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
10nA |
Dual Supply Voltage |
5.5V |
Input Bias Current |
10nA |
Current - Quiescent (Max) |
14μA |
Voltage - Input Offset (Max) |
4mV @ 5V |
Current - Input Bias (Max) |
0.01μA @ 5V |
CMRR, PSRR (Typ) |
78dB CMRR, 80dB PSRR |
Height |
675μm |
Length |
2mm |
Width |
1.3mm |
Thickness |
675μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMV7272TL/NOPB Overview
In order to facilitate transportation, it is packaged in 8-WFBGA .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has a pin count of 8 .You may wish to search LMV7272 for more solutions that address your specific needs.There is a quiescent current of 14μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 27μA .A current supply greater than 27μA may cause the comparator to malfunction.There is a maximum current that can be input into the device of 10nA .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Packed in TR , this device is for general uses (often in ADC circuits).
LMV7272TL/NOPB Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7272TL/NOPB Applications
There are a lot of Texas Instruments LMV7272TL/NOPB linear comparators applications.
- Infotainment & cluster
- RC Timers
- Current and voltage sensing
- Motor drives
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
- Infotainment and Clusters
- Notebooks and PDAs
- Mobile Phones
- Lithium ion battery monitoring