LMV7275MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7275 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7275MF Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail .Ready for shipping in Tape & Reel (TR) package.The comparator has 5 terminals.Electronic comparator is a part of Comparator family.With a voltage of 1.8V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .This is a 1 element comparator.A total of 5 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.In order to find a solution that meets your specific needs, search LMV7275 for more pin-to-pin solutions.A quiescent current of 14μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 14μA .A current supply greater than 14μA may cause the comparator to malfunction.You are allowed to input a maximum current of 10nA into the device.A normal operation requires a voltage of 5V .The device is acceptable to pack by TR .
LMV7275MF Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7275MF Applications
There are a lot of Texas Instruments LMV7275MF linear comparators applications.
- Zero-Crossing Detectors
- Building automation
- Window Comparators
- Portable Battery Monitoring
- Industrial
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- Consumer Medical Electronics
- Pulse, Squarewave, and Time Delay Generators
- Laptop Computers
