LMV7275MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7275 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7275MF/NOPB Overview
For convenience, it is packaged in SC-74A, SOT-753 .Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail .As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.When supplied with 1.8V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.The device includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.Search LMV7275 to find more pin-to-pin solutions.In this comparator, the quiescent current is 14μA .The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 14μA .A current supply greater than 14μA may result in the comparator malfunctioning.Input current to the device is limited to 10nA .Normal operation requires 5V operating supply voltage.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV7275MF/NOPB Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7275MF/NOPB Applications
There are a lot of Texas Instruments LMV7275MF/NOPB linear comparators applications.
- Building automation
- Battery-Powered Electronics
- Mobile Phones and Tablets
- Analog front end
- Alarm and Monitoring Circuits
- Battery management and protection
- Infotainment & cluster
- Limit Comparators
- Mobile Communications
- Factory automation & control
