LMV7275MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7275 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7275MFX/NOPB Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .There is a CMOS, Open-Drain, Rail-to-Rail output type for this comparator.The chip is packaged with Tape & Reel (TR) .You can find 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.Electronic comparator includes 5 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 5 pins.You may wish to search LMV7275 for more solutions that address your specific needs.There is 14μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 14μA .An excess of current supply over 14μA could result in malfunction of the comparator.There is a maximum current that can be input into the device of 10nA .This device is usually used in ADC circuits (packaged in TR ).
LMV7275MFX/NOPB Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7275MFX/NOPB Applications
There are a lot of Texas Instruments LMV7275MFX/NOPB linear comparators applications.
- High-Speed Sampling Circuits
- Limit Comparators
- Building automation
- General-Purpose, Low-Voltage Applications
- Power Supervision
- Window Comparators, Multivibrators
- RC Timers
- DC/DC and AC/DC power supplies
- Power management
- Handheld Instruments
