LMV7275MG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7275 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7275MG Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 in order to facilitate transportation.A comparator with a CMOS, Open-Drain, Rail-to-Rail output is used here.Ready for shipping in Tape & Reel (TR) package.There are5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 1.8V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .This is a 1 element comparator.There are 5 pins on this board.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.If you require more pin-to-pin solutions, search LMV7275 for more options.As a result, this comparator displays a quiescent current of 14μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 14μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 14μA .Electronic comparator is possible to input a maximum current of 10nA into the device.The operating supply voltage for normal operation should be 5V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV7275MG Features
CMOS, Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7275MG Applications
There are a lot of Texas Instruments LMV7275MG linear comparators applications.
- Analog front end
- Security Detection Systems
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- RC Timers
- Consumer Medical Electronics
- Motor drives
- Window Comparators
