LMV7291MG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7291 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 1.8 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7291MG Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail output on this device.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 1.8V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator includes 5 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 5 pins.Search LMV7291 to find more pin-to-pin solutions.There is a quiescent current of 14μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 14μA .Input current to the device is limited to 10nA .As a result, 1 channels work together to maintain the quality of the output.The operating supply voltage for normal operation should be 2.7V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV7291MG Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7291MG Applications
There are a lot of Texas Instruments LMV7291MG linear comparators applications.
- Motor drives
- Power Supervision
- Self-diagnostics
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Ultra-Low Power Systems
- Infotainment & cluster
- Security Detection Systems
- Hand-Held Electronics
- Mobile Phones
