LMV7291MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7291 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 2.7V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 1.8 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7291MG/NOPB Overview
A convenient packaging is provided in the form of 5-TSSOP, SC-70-5, SOT-353 .Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .The part will be shipped by Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 1 elements.Electronic comparator has 5 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 5 pins on the comparator.You may wish to search LMV7291 for more solutions that address your specific needs.In this comparator, the quiescent current is 14μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 14μA .A supply current exceeding 14μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 10nA .Comparator electronics is necessary to have a voltage of 2.7V for normal operation.Often found in ADC circuits, this device is packed in TR .
LMV7291MG/NOPB Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7291MG/NOPB Applications
There are a lot of Texas Instruments LMV7291MG/NOPB linear comparators applications.
- Wearable Devices
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Set Top Boxes
- RC Timers
- Window Comparators, Multivibrators
- Metering Systems
- Consumer Medical Electronics
- Notebooks and PDAs
