LMV7291MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7291 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 2.7V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 1.8 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7291MGX/NOPB Overview
A convenient transport package is provided in 5-TSSOP, SC-70-5, SOT-353 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.The chip is packaged with Tape & Reel (TR) .As you can see, the comparator has5 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.Electronic comparator can be classified as a General Purpose chip.This is a 1 element comparator.The device is equipped with 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.5 pins are present on the comparator.You can find more pin-to-pin solutions by searching LMV7291 .A quiescent current of 14μA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 14μA .A current supply greater than 14μA may cause the comparator to malfunction.Input current to the device cannot exceed 10nA .For normal operation, the operating supply voltage must be 2.7V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV7291MGX/NOPB Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7291MGX/NOPB Applications
There are a lot of Texas Instruments LMV7291MGX/NOPB linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Portable and Battery-Powered Systems
- Power Supervision
- Lithium ion battery monitoring
- High-Speed Sampling Circuits
- Point of load regulators
- RC Timers
- Mobile Phones
- General-Purpose, Low-Voltage Applications
- Limit Comparators
