LMV761MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV761 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Nominal Supply Current | 700μA |
| Output Current | 40mA |
| Max Supply Current | 700μA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 120 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.000005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 50pA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV761MAX/NOPB Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .A comparator supplied with 2.7V voltage can complete many demanding tasks.It's a typical General Purpose comparator.Currently, it consists of only 1 elements.The board includes 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 8 pins.Alternatively, you may search for LMV761 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 700μA volts.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 700μA in order to use the device normally.A current supply greater than 700μA may result in the comparator malfunctioning.In order to run the device, there are only 2.7/5V power supplies required.The operating supply voltage for normal operation should be 3V .The device is acceptable to pack by TR .
LMV761MAX/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV761MAX/NOPB Applications
There are a lot of Texas Instruments LMV761MAX/NOPB linear comparators applications.
- Alarm and Monitoring Circuits
- General Purpose Low Voltage Applications
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Motor drives
- High-Speed Differential Line Receiver
- Wearable Devices
- Industrial
- Simple Analog-to-Digital Converters (ADCs)
- System control and monitoring
