LMV761MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMV761 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 300μA |
| Output Current | 40mA |
| Max Supply Current | 700μA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 225 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.000005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV761MF Overview
A convenient packaging is provided in the form of SOT-23-6 .The comparator has a type Push-Pull output.Electronic comparator is shipped by Tape & Reel (TR) .There are 6 terminals on the comparator.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .The board includes 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 6 pins on the comparator.You may wish to search LMV761 for more solutions that address your specific needs.A quiescent current of 700μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.A current supply greater than 700μA may result in the comparator malfunctioning.Input current to the device is limited to 50pA .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV761MF Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV761MF Applications
There are a lot of Texas Instruments LMV761MF linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Set Top Boxes
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones and Tablets
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- Wireless Base Stations
- Notebooks and PDAs
- Industrial
- Mobile Communications
