Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Base Part Number |
LMV761 |
Pin Count |
6 |
Output Type |
Push-Pull |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Power Supplies |
2.7/5V |
Nominal Supply Current |
700μA |
Output Current |
40mA |
Max Supply Current |
700μA |
Propagation Delay |
225 ns |
Quiescent Current |
700μA |
Response Time |
225 ns |
Common Mode Rejection Ratio |
100 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5V |
Input Offset Voltage (Vos) |
200μV |
Average Bias Current-Max (IIB) |
0.000005μA |
Power Supply Rejection Ratio (PSRR) |
110dB |
Supply Voltage Limit-Max |
5.5V |
Max Input Current |
50pA |
Input Bias Current |
50pA |
Voltage - Input Offset (Max) |
0.2mV @ 5V |
Current - Input Bias (Max) |
50pA @ 5V |
CMRR, PSRR (Typ) |
100dB CMRR, 110dB PSRR |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMV761MFX Overview
A convenient transport package is provided in SOT-23-6 .Output type Push-Pull is used for this comparator.This device is designed in Tape & Reel (TR) case.There are6 terminals on the comparator.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 1 elements.The device contains 6 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 6 pins.Alternatively, you may search for LMV761 to find more pin-to-pin solutions for your specific needs.There is 700μA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 700μA supply current.A current supply greater than 700μA may cause the comparator to malfunction.The device can be powered by 2.7/5V power supplies.A maximum current of 50pA can be supplied to the device.Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.With a TR package, this device is designed for general use (usually in ADC circuits).
LMV761MFX Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV761MFX Applications
There are a lot of Texas Instruments LMV761MFX linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Infotainment & cluster
- High-Speed Sampling Circuits
- Current and voltage sensing
- Mobile Communications
- Portable Battery Monitoring
- Motor drives
- Portable and Battery-Powered Systems
- Building automation