LMV771MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV771 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 550μA |
| Output Current | 18mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.23pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 850μV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV771MGX/NOPB Overview
A 5-TSSOP, SC-70-5, SOT-353 case is used to package the op amp. Buffer amps of this type are called General Purpose-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 5 terminations. In total, there are 5 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 850μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Operational amplifier can operate supply current at 600μA. Maintain 100dB as the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The total number of elements in this buffer amplifier is 1. For the packing of the instrumentation amplifier, TR is adopted.
LMV771MGX/NOPB Features
5 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV771MGX/NOPB Applications
There are a lot of Texas Instruments LMV771MGX/NOPB Instrumentational OP Amps applications.
- Power transmission
- single/dual op amp sum and difference circuits
- Band-pass filter
- RF cable systems
- Micro signal measurement
- Radar
- Video amplifiers
- Blood pressure sensors
- Multiplication circuits
- Image computer boards
