banner_page

LMV772MA/NOPB

75mA per Channel 0.23pA 80 dB Instrumentational OP Amps 2.7V~5.5V LMV772 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV772MA/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 333
  • Description: 75mA per Channel 0.23pA 80 dB Instrumentational OP Amps 2.7V~5.5V LMV772 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Number of Functions 2
Supply Voltage 5V
Base Part Number LMV772
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Nominal Supply Current 550μA
Output Current 18mA
Current - Supply 600μA
Slew Rate 1.4V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 0.23pA
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Output Current per Channel 75mA
Input Offset Voltage (Vos) 1mV
Bandwidth 3.5MHz
Unity Gain BW-Nom 3500 kHz
Voltage Gain 100dB
Power Supply Rejection Ratio (PSRR) 82dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 5.75V
Voltage - Input Offset 250μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.0001μA
Programmable Power NO
Input Offset Current-Max (IIO) 0.0001μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260

LMV772MA/NOPB Overview


There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. There should be no change in the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. We recommend that you use this electronic part with an 600μA supply in order to get the best performance from it.

LMV772MA/NOPB Features


8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail

LMV772MA/NOPB Applications


There are a lot of Texas Instruments LMV772MA/NOPB Instrumentational OP Amps applications.

  • Power transmission
  • Exponential operation circuits
  • ECG equipment
  • Communication
  • Radiation thermometry transducers
  • Video data acquisition
  • Radar
  • Video conversion and routing
  • Communication device
  • Band-stop filter

Write a review

Note: HTML is not translated!
    Bad           Good