LMV772QMM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV772 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 550μA |
| Output Current | 18mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.23pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 75mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.75V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV772QMM/NOPB Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 600μA. 100dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. For packing the buffer amplifier, the TR-axis is adopted. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
LMV772QMM/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV772QMM/NOPB Applications
There are a lot of Texas Instruments LMV772QMM/NOPB Instrumentational OP Amps applications.
- Subtraction operation circuits
- Measurements of Wheatstone bridge
- Semiconductor detectors
- Instrumentation
- Industrial applications including automation
- Band-pass filter
- Radar
- Test equipment
- Non-polarized electrodes
- Division circuits
