banner_page

LMV793MA/NOPB

60mA per Channel 0.1pA 80 dB Instrumentational OP Amps 1.8V~5.5V LMV793 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV793MA/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 685
  • Description: 60mA per Channel 0.1pA 80 dB Instrumentational OP Amps 1.8V~5.5V LMV793 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Base Part Number LMV793
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 1
Power Supplies 2/5V
Operating Supply Current 1.15mA
Nominal Supply Current 1.15mA
Output Current 60mA
Slew Rate 35V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 0.1pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 1.35mV
Gain Bandwidth Product 88MHz
Unity Gain BW-Nom 88000 kHz
Voltage Gain 110dB
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 100μV
Low-Bias YES
Micropower NO
Programmable Power NO
Wideband YES
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMV793MA/NOPB Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 1.35mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 1.15mA . The voltage gain should stay at 110dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier.

LMV793MA/NOPB Features


8 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail

LMV793MA/NOPB Applications


There are a lot of Texas Instruments LMV793MA/NOPB Instrumentational OP Amps applications.

  • Portable docking station
  • Radiation thermometry transducers
  • Industrial applications including automation
  • Image computer boards
  • Biopotential
  • Switching amplifier
  • Signal amplification
  • Strain gauges
  • Subtraction operation circuits
  • MP3

Write a review

Note: HTML is not translated!
    Bad           Good