LMV796MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMV796 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 60mA |
| Slew Rate | 11.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.35mV |
| Gain Bandwidth Product | 17MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV796MFX/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 5 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.35mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 1.15mA . It is recommended to keep the voltage gain at 110dB at all times. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TR.
LMV796MFX/NOPB Features
5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV796MFX/NOPB Applications
There are a lot of Texas Instruments LMV796MFX/NOPB Instrumentational OP Amps applications.
- Weighing systems
- Strain gauges
- Commercial audio systems
- Television broadcasting equipment
- Exponential operation circuits
- Hand-held batteries
- Test equipment
- Digital cameras
- Division circuits
- Weak signal detection
