LMV796QMFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMV796 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 60mA |
| Slew Rate | 11.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.35mV |
| Gain Bandwidth Product | 17MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV796QMFX/NOPB Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 5 terminations in the next few months. In total, there are 5 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 5 pins. In terms of input offset voltage, operational amplifier rates 1.35mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . You can run this op amp ic on 1.15mA . 110dB should remain the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. A voltage rating of 1 is indicated for the op amp's operating supply voltage. As a result of this, the buffer amplifier is packed in TR. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
LMV796QMFX/NOPB Features
5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV796QMFX/NOPB Applications
There are a lot of Texas Instruments LMV796QMFX/NOPB Instrumentational OP Amps applications.
- Multimedia playback equipment
- Vehicle electronics
- Power transmission
- Industrial applications including automation
- Navigation
- Commercial audio systems
- Non-polarized electrodes
- Digital cameras
- Computer workstations
- High-frequency data acquisition systems
