Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LMV797 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
2 |
Operating Supply Current |
1.3mA |
Nominal Supply Current |
1.3mA |
Output Current |
60mA |
Slew Rate |
11.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
0.1pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Output Current per Channel |
60mA |
Input Offset Voltage (Vos) |
1.35mV |
Bandwidth |
17MHz |
Unity Gain BW-Nom |
17000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
100μV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000001μA |
Programmable Power |
NO |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMV797MM/NOPB Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 2.5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. There is an input offset voltage of 1.35mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. A supply current of 1.3mA can be used to operate this linear amplifier. Op amp is a member of the 110dB's 110dB family. Op amp ic has 2 channels. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 5V. It is used TR to pack the op amps.
LMV797MM/NOPB Features
8 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV797MM/NOPB Applications
There are a lot of Texas Instruments LMV797MM/NOPB Instrumentational OP Amps applications.
- Television
- Signal transformation
- Large motor controllers
- Switching amplifier
- Gaming industry
- Automotive sensors
- Voltage regulation circuit
- Medical imaging
- Portable docking station
- High gain DC amplifier