LMV821DCKTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMV821 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 400μA |
| Output Current | 45mA |
| Slew Rate | 1.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LMV821DCKTE4 Overview
In order to protect the op amps, a 5-TSSOP, SC-70-5, SOT-353 case is used. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. Buffer amplifier has a total of 5 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 5 pins are included on the operational amplifiers. The input offset voltage is 3.5mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 300μA , this buffer op amp will be able to operate. 105dB should be the voltage gain. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This linear amplifier pack is based on the TAPE AND REEL axis.
LMV821DCKTE4 Features
5 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV821DCKTE4 Applications
There are a lot of Texas Instruments LMV821DCKTE4 Instrumentational OP Amps applications.
- Test and measurement instruments
- Automatic control
- Power generator
- Automation control systems
- Car stereo
- Measurements of Wheatstone bridge
- Test equipment
- pH (acidity)
- High input resistance broadband
- Biopotential
