LMV822M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV822 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Voltage | 5V |
| Nominal Supply Current | 450μA |
| Output Current | 16mA |
| Max Supply Current | 700μA |
| Current - Supply | 500μA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 0.14μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV822M/NOPB Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 3.5mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Keeping the voltage gain at 105dB is the best course of action. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A supply of 500μA or higher is recommended for use with this electronic part.
LMV822M/NOPB Features
8 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV822M/NOPB Applications
There are a lot of Texas Instruments LMV822M/NOPB Instrumentational OP Amps applications.
- Broadcasting
- Test and measurement instruments
- Cinema or auditorium audio system
- Digital cameras
- Signal transformation
- High speed sample
- Weighing systems
- Micro signal measurement
- Wireless base stations
- Integrator circuits
