LMV824DR2G
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.38μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1mV |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Output Current | 26mA |
| Slew Rate | 2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 119nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 45mA |
LMV824DR2G Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. The pins on this board total to 14 in total. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 1mA , this buffer op amp will be able to operate. Voltage gain should remain at 100dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 4.
LMV824DR2G Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV824DR2G Applications
There are a lot of ON Semiconductor LMV824DR2G Instrumentational OP Amps applications.
- Precision measurement
- Hand-held batteries
- Signal transformation
- Band-stop filter
- Laptop
- Television broadcasting equipment
- earphone
- Industrial applications including automation
- Scintillation detectors
- Multimedia playback equipment
