LMV824DTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Output Current | 26mA |
| Slew Rate | 2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 119nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.38μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1mV |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV824DTBR2G Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 14. In total, there are 14 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 3.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 1mA volt supply current is needed for this linear amplifier to operate. 100dB should remain the voltage gain. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 4 different elements in total.
LMV824DTBR2G Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV824DTBR2G Applications
There are a lot of ON Semiconductor LMV824DTBR2G Instrumentational OP Amps applications.
- Mobile phone
- Video conversion and routing
- High-frequency data acquisition systems
- Wireless base stations
- Broadcasting
- Test equipment
- ECG equipment
- Navigation
- Industrial control system
- Non-polarized electrodes
