LMV824IDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.5/5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.3mA |
| Output Current | 45mA |
| Slew Rate | 1.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 5.5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LMV824IDR Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 3.5mV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1mA . You should keep the voltage gain at 105dB for the time being. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. As a result of this, the buffer amplifier is packed in TAPE AND REEL.
LMV824IDR Features
14 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV824IDR Applications
There are a lot of Texas Instruments LMV824IDR Instrumentational OP Amps applications.
- Information processing
- Car stereo
- Automotive sensors
- Home audio systems
- single/dual op amp sum and difference circuits
- Large motor controllers
- earphone
- High/low-pass filter circuit
- Radiation thermometry transducers
- Professional videography
