LMV824M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 720μA |
| Output Current | 16mA |
| Max Supply Current | 1.3mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 105dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV824M/NOPB Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 1mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 105dB. Instrumentation amplifier has 4 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LMV824M/NOPB Features
14 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV824M/NOPB Applications
There are a lot of Texas Instruments LMV824M/NOPB Instrumentational OP Amps applications.
- Blood pressure sensors
- Signal filtering
- Differentiator circuits
- Industrial applications including automation
- RF cable systems
- Vehicle electronics
- Large motor controllers
- High speed sample
- Oscilloscopes
- Integrator circuits
