LMV824MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.5/5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 720μA |
| Output Current | 16mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 105dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV824MT/NOPB Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. It is estimated that there will be at least 14 terminations this year. The total number of pins on linear amplifier is 14. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. There is an input offset voltage of 3.5mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 1mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 105dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4.
LMV824MT/NOPB Features
14 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV824MT/NOPB Applications
There are a lot of Texas Instruments LMV824MT/NOPB Instrumentational OP Amps applications.
- Power control
- ECG equipment
- pH (acidity)
- PDA
- Gaming industry
- Portable media players
- E-book readers
- Fast A/D and D/A converters
- Weighing systems
- Instrumentation
