LMV832MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV832 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 470μA |
| Nominal Supply Current | 240μA |
| Output Current | 27mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 66mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 3.3MHz |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 2MHz |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV832MM/NOPB Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 3.3V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 470μA . Voltage gain should remain at 130dB. Op amp ic has 2 channels. The linear amplifier is packaged by using a TR axis.
LMV832MM/NOPB Features
8 Pins
supply voltage of 3.3V
130dB voltage gain
LMV832MM/NOPB Applications
There are a lot of Texas Instruments LMV832MM/NOPB Instrumentational OP Amps applications.
- Ultrasound transducers
- Tablets
- Polarized electrodes
- Hand-held batteries
- Signal filtering
- Home audio systems
- Displayers for aircraft and air transportation control systems
- Proportional counter tubes
- Wireless base stations
- Precision measurement
