LMV841QMG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Digi-Reel® |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMV841 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.03mA |
| Nominal Supply Current | 930μA |
| Output Current | 32mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 4.5MHz |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 133dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV841QMG/NOPB Overview
Packaging for the buffer amplifier is in the form of a 5-TSSOP, SC-70-5, SOT-353 case. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Digi-Reel? case. It is estimated that there will be 5 terminations in the next few months. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 3.3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 500μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 1.03mA , this buffer op amp will be able to operate. Op amp is a member of the 133dB's 133dB family. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are a total of 1 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TR. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
LMV841QMG/NOPB Features
5 Pins
supply voltage of 3.3V
133dB voltage gain
Output Type: Rail-to-Rail
LMV841QMG/NOPB Applications
There are a lot of Texas Instruments LMV841QMG/NOPB Instrumentational OP Amps applications.
- Tablets
- Video computer boards
- Semiconductor detectors
- Proportional operation circuits
- Subtraction operation circuits
- Integrator circuits
- Band-stop filter
- Television broadcasting equipment
- Power transmission
- Exponential operation circuits
