LMV844MAX/NOPB
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV844 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Operating Supply Current | 1.03mA |
| Nominal Supply Current | 930μA |
| Output Current | 32mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 133dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.2V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Wideband | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
LMV844MAX/NOPB Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins on it. This linear amplifier should be powered by an 3.3V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 14 pins. In terms of input offset voltage, operational amplifier rates 500μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 1.03mA, this op amp ic can operate. There should be no change in the voltage gain at 133dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. It is possible to count 4 elements on this buffer amplifier. As a result of this, the buffer amplifier is packed in TR.
LMV844MAX/NOPB Features
14 Pins
supply voltage of 3.3V
133dB voltage gain
Output Type: Rail-to-Rail
LMV844MAX/NOPB Applications
There are a lot of Texas Instruments LMV844MAX/NOPB Instrumentational OP Amps applications.
- Instrumentation
- High gain DC amplifier
- Industrial control system
- Automotive sensors
- Television
- Image computer boards
- Car stereo
- Signal filtering
- RF cable systems
- Communication device
