LMV844MTX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | LMV844 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Operating Supply Current | 1.03mA |
| Nominal Supply Current | 930μA |
| Output Current | 32mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 133dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.2V |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Wideband | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV844MTX/NOPB Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 3.3V. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using an 1.03mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 133dB is the best course of action. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The op amp is rated for an operating supply voltage of 4. A TR-shaped amplifier is used to pack the buffer amps.
LMV844MTX/NOPB Features
14 Pins
supply voltage of 3.3V
133dB voltage gain
Output Type: Rail-to-Rail
LMV844MTX/NOPB Applications
There are a lot of Texas Instruments LMV844MTX/NOPB Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Integrator circuits
- Inverse/same-phase proportional circuit
- Cinema or auditorium audio system
- Computer workstations
- Band-pass filter
- Voltage regulation circuit
- Navigation
- Tablets
- Television
