LMV861MGE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMV861 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 2.47mA |
| Nominal Supply Current | 2.25mA |
| Output Current | 67mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 31000 kHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 273μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV861MGE/NOPB Overview
It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. There are a total of 5 pins on this op amp. This linear amplifier should be powered by an 3.3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 5 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 2.47mA can be used to operate this linear amplifier. Op amp is a member of the 113dB's 113dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. TR is adopted to pack the instrumentation amplifier.
LMV861MGE/NOPB Features
5 Pins
supply voltage of 3.3V
113dB voltage gain
Output Type: Rail-to-Rail
LMV861MGE/NOPB Applications
There are a lot of Texas Instruments LMV861MGE/NOPB Instrumentational OP Amps applications.
- Strain gauges
- Medical imaging
- Television broadcasting equipment
- Communication
- Multiplication circuits
- MP3
- earphone
- Test and measurement instruments
- Displayers for aircraft and air transportation control systems
- Laptop
