LMV861MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMV861 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 2.47mA |
| Nominal Supply Current | 2.25mA |
| Output Current | 67mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 31000 kHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 273μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV861MGX/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 5. A total of 5 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 2.47mA. There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are 1 elements in total in this linear amplifier. This linear amplifier pack is based on the TR axis.
LMV861MGX/NOPB Features
5 Pins
supply voltage of 3.3V
113dB voltage gain
Output Type: Rail-to-Rail
LMV861MGX/NOPB Applications
There are a lot of Texas Instruments LMV861MGX/NOPB Instrumentational OP Amps applications.
- Home audio systems
- earphone
- Differentiator circuits
- High/low-pass filter circuit
- Scintillation detectors
- Television broadcasting equipment
- Communication
- Image computer boards
- Car stereo
- Test and measurement instruments
