banner_page

LMV862MM/NOPB

2 Channels 150mA per Channel 0.1pA 78 dB Instrumentational OP Amps 0.00001μA 2.7V~5.5V ±1.35V~2.75V LMV862 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV862MM/NOPB
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 815
  • Description: 2 Channels 150mA per Channel 0.1pA 78 dB Instrumentational OP Amps 0.00001μA 2.7V~5.5V ±1.35V~2.75V LMV862 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Base Part Number LMV862
Pin Count 8
Output Type Rail-to-Rail
Power Supplies 3/5V
Number of Channels 2
Operating Supply Current 4.85mA
Nominal Supply Current 2.25mA
Output Current 67mA
Slew Rate 20V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 78 dB
Current - Input Bias 0.1pA
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±1.35V~2.75V
Output Current per Channel 150mA
Input Offset Voltage (Vos) 1mV
Bandwidth 30MHz
Gain Bandwidth Product 31MHz
Unity Gain BW-Nom 31000 kHz
Voltage Gain 113dB
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 77dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 273μV
Low-Bias YES
Micropower NO
Max Frequency 2.4GHz
Bias Current-Max (IIB) @25C 0.00001μA
Programmable Power NO
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.65mm

LMV862MM/NOPB Overview


Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Op amp ic rates 1mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. You can run this op amp ic on 4.85mA . Maintain 113dB as the voltage gain. Instrumentation amplifier has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TR-shape according to the design.

LMV862MM/NOPB Features


8 Pins
supply voltage of 3.3V
113dB voltage gain
Output Type: Rail-to-Rail

LMV862MM/NOPB Applications


There are a lot of Texas Instruments LMV862MM/NOPB Instrumentational OP Amps applications.

  • Gaming industry
  • Communication device
  • Instrumentation
  • Fast A/D and D/A converters
  • Ultrasound transducers
  • Proportional counter tubes
  • Weak signal detection
  • High input resistance broadband
  • ECG equipment
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good