LMV931IDBVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV931 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 210μA |
| Output Current | 100mA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 113dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LMV931IDBVR Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. There are a total of 5 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 116μA and 10 . There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is used TAPE AND REEL to pack the op amps.
LMV931IDBVR Features
5 Pins
supply voltage of 1.8V
113dB voltage gain
Output Type: Rail-to-Rail
LMV931IDBVR Applications
There are a lot of Texas Instruments LMV931IDBVR Instrumentational OP Amps applications.
- Car stereo
- Portable electronic products powered by batteries
- Signal operation
- Television
- Thermocouples
- Portable docking station
- PDA
- Oscilloscopes
- Integrator circuits
- Computer workstations
