LMV931MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV931 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 103μA |
| Output Current | 8mA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 14nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1.4MHz |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV931MGX/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 116μA supply current, this operational amplifier ics can be operated. 113dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 3V voltage. The instrumentation amplifier is packed in the form of TR.
LMV931MGX/NOPB Features
5 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail
LMV931MGX/NOPB Applications
There are a lot of Texas Instruments LMV931MGX/NOPB Instrumentational OP Amps applications.
- Information processing
- Video conversion and routing
- Home audio systems
- Strain gauges
- Band-stop filter
- Television broadcasting equipment
- Multiplication circuits
- Signal operation
- Hand-held batteries
- High/low-pass filter circuit
