LMV931Q1MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV931 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 116μA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 14nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 1mV |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 1.5MHz |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV931Q1MG/NOPB Overview
Packaging for the buffer amplifier is in the form of a 5-TSSOP, SC-70-5, SOT-353 case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. Buffer amplifier has a total of 5 pins. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Operational amplifier can operate supply current at 116μA. It is a member of the 113dB's 113dB family. On this instrumentation amplifier, there are 1 circuits that are connected together. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. This linear amplifier pack is based on the TR axis. The Automotive, AEC-Q100 represents the op amp's series number.
LMV931Q1MG/NOPB Features
5 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail
LMV931Q1MG/NOPB Applications
There are a lot of Texas Instruments LMV931Q1MG/NOPB Instrumentational OP Amps applications.
- Fission chambers
- Thermocouples
- Gaming industry
- Inverse/same-phase proportional circuit
- Weighing systems
- Signal operation
- Strain gauges
- Polarized electrodes
- Mobile phone
- Active probe
