LMV931SQ3T2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV931 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 210μA |
| Output Current | 80mA |
| Slew Rate | 0.48V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 113dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 50kHz |
| Programmable Power | NO |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV931SQ3T2G Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. Buffer amplifier has a total of 5 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are located on the operational amplifiers. The input offset voltage is 6mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 116μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 113dB is the best course of action. 1 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LMV931SQ3T2G Features
5 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail
LMV931SQ3T2G Applications
There are a lot of ON Semiconductor LMV931SQ3T2G Instrumentational OP Amps applications.
- Home audio systems
- Fast A/D and D/A converters
- Strain gauges
- Large motor controllers
- High input resistance broadband
- Signal operation
- Power generator
- Logarithmic operation circuits
- Blood pressure sensors
- Television broadcasting equipment
