LMV951MK/NOPB

1 Channels 85mA per Channel 36nA 82 dB Instrumentational OP Amps 0.08μA 0.9V~3V LMV951 6 Pins SOT-23-6 Thin, TSOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-LMV951MK/NOPB
Package: SOT-23-6 Thin, TSOT-23-6
Datasheet: -
Stock: 852
Description: 1 Channels 85mA per Channel 36nA 82 dB Instrumentational OP Amps 0.08μA 0.9V~3V LMV951 6 Pins SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6 Thin, TSOT-23-6
Number of Pins	6
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1V
Terminal Pitch	0.95mm
Base Part Number	LMV951
Pin Count	6
Output Type	Rail-to-Rail
Power Supplies	0.9/3V
Number of Channels	1
Operating Supply Current	570μA
Nominal Supply Current	370μA
Output Current	45mA
Slew Rate	1.4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	82 dB
Current - Input Bias	36nA
Voltage - Supply, Single/Dual (±)	0.9V~3V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2.8mV
Bandwidth	2.8MHz
Unity Gain BW-Nom	2800 kHz
Voltage Gain	116dB
Average Bias Current-Max (IIB)	0.08μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1.5mV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.08μA
Programmable Power	NO
Height	1.1mm
Length	2.9mm
Width	1.6mm
Thickness	870μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMV951MK/NOPB Overview

A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 6. A total of 6 pins are attached to buffer op amp. The linear amplifier should be run at 1V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 6 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 2.8mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 570μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 116dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The linear amplifier is packaged by using a TR axis.