LMV951MKX/NOPB
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.08μA |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMV951 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 0.9/3V |
| Operating Supply Current | 570μA |
| Nominal Supply Current | 370μA |
| Output Current | 45mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 36nA |
| Voltage - Supply, Single/Dual (±) | 0.9V~3V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.8mV |
| Gain Bandwidth Product | 2.8MHz |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.085μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
LMV951MKX/NOPB Overview
In order to protect the op amps, a SOT-23-6 Thin, TSOT-23-6 case is used. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 6 terminations have been reported in the past few weeks. In this case, there are 6 pins on the board. Please take in mind that this instrumentation amplifier should be run at 1V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 6 pins. Op amp ic rates 2.8mV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 570μA . There should be no change in the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. An buffer amplifier is packed in a TR-shape according to the design.
LMV951MKX/NOPB Features
6 Pins
supply voltage of 1V
116dB voltage gain
Output Type: Rail-to-Rail
LMV951MKX/NOPB Applications
There are a lot of Texas Instruments LMV951MKX/NOPB Instrumentational OP Amps applications.
- Comparator
- Multiplication circuits
- Inverse/same-phase proportional circuit
- Automation control systems
- Measurements of Wheatstone bridge
- Signal operation
- Wireless base stations
- Television broadcasting equipment
- Test equipment
- High speed sample
