LMV981MF
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.953mm |
| Base Part Number | LMV981 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 103μA |
| Output Current | 8mA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 14nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1.4MHz |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 113dB |
| Average Bias Current-Max (IIB) | 0.035μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.025μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV981MF Overview
Op amp is packaged in SOT-23-6 case. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 6. In this case, there are 6 pins on the board. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 6 pins are included on the operational amplifiers. There is an input offset voltage of 4mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 116μA and 10 . 113dB should be the voltage gain. Op amp ic has 1 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. As a result of this, the buffer amplifier is packed in TR.
LMV981MF Features
6 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail
LMV981MF Applications
There are a lot of Texas Instruments LMV981MF Instrumentational OP Amps applications.
- Automotive sensors
- Biopotential
- Measurements of Wheatstone bridge
- PDA
- Video computer boards
- Video data acquisition
- Voltage regulation circuit
- High speed sample
- Television
- Scintillation detectors
