LMV981TL/NOPB
| Parameters | |
|---|---|
| Package / Case | 6-WFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMV981 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 103μA |
| Output Current | 8mA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 14nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 113dB |
| Average Bias Current-Max (IIB) | 0.035μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.025μA |
| Height | 675μm |
| Length | 1.5mm |
| Width | 1.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
LMV981TL/NOPB Overview
There is a 6-WFBGA, DSBGA case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 6h termination of the year. Linear amplifier has a total of 6 pins. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 6 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 116μA, this op amp ic can operate. Op amp is a member of the 113dB's 113dB family. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier has a total of 1 elements. To pack the operational amplifier ics, TR is adopted as the packing method.
LMV981TL/NOPB Features
6 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail
LMV981TL/NOPB Applications
There are a lot of Texas Instruments LMV981TL/NOPB Instrumentational OP Amps applications.
- Tablets
- Gaming industry
- Proportional operation circuits
- Commercial audio systems
- High-frequency data acquisition systems
- Video amplifiers
- Polarized electrodes
- ECG equipment
- Medical instruments
- Fission chambers
