LMX2531LQ1650E/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Type | Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.8V~3.2V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.7GHz |
| Base Part Number | LMX2531 |
| Output | CMOS |
| Pin Count | 36 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 3.2V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Operating Supply Current | 32mA |
| Nominal Supply Current | 46mA |
| Input | Clock |
| Ratio - Input:Output | 2:2 |
| Power Consumption | 102mW |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 800μm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMX2531LQ1650E/NOPB Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 36-WFQFN Exposed Pad package includes this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 36 terminations in this file. This clock generator ic should receive a voltage of 3V. Clock is designed as this clock generator's input. This component can be conveniently installed on the panel thanks to the Surface Mount. There is a maximum voltage of 3.2V for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 2.8V. There are 2.8V~3.2V different supply voltages that can be provided for this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This is a clock generator compatible with CMOS logic levels. Frequency Synthesizer (RF) is the type of electrical part that this component is classified as. Clock PLL is equipped with 36 pin count. The related electrical components for the base part number LMX2531 can be found below. There are 36 pins on the frequency generators that are available for use. The supply voltage should be maintained at 3V for high efficiency. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. The output frequency can be amplified as high as possible with its 1 signal outputs. At 1.7GHz, frequency synthesizer achieves high efficiency. The supply current of 32mA needs to be provided to fully play clock generator's function.
LMX2531LQ1650E/NOPB Features
Available in the 36-WFQFN Exposed Pad
Supply voltage of 3V
Operating supply voltage of 3V
LMX2531LQ1650E/NOPB Applications
There are a lot of Texas Instruments LMX2531LQ1650E/NOPB Clock Generators applications.
- High-frequency induction heating
- Automatic control system test
- Laptops
- Reference signals to RF systems
- Signal modulation and demodulation
- Media broadcast servers
- Communication infrastructure
- Wireless base station for LTE, LTE-advanced
- Antenna automatic tracking
- Mixed mode (analog and digital) applications
