LMX324IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMX324 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 130μA |
| Nominal Supply Current | 180μA |
| Output Current | 26mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 27nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 4mV |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.11μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMX324IDT Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 14 mark. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 130μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 110dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are a total of 4 elements in this linear amplifier. The linear amplifier is packaged by using a TAPE AND REEL axis.
LMX324IDT Features
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail
LMX324IDT Applications
There are a lot of STMicroelectronics LMX324IDT Instrumentational OP Amps applications.
- Video data acquisition
- Exponential operation circuits
- Differentiator circuits
- Switching amplifier
- Power generator
- Instrumentation
- Thermocouples
- Automation control systems
- Integrator circuits
- Comparator
