Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LMX339 |
Pin Count |
14 |
Output Type |
Open Drain |
Number of Elements |
4 |
Power Supplies |
3/5V |
Nominal Supply Current |
300μA |
Output Current |
73mA |
Max Supply Current |
300μA |
Propagation Delay |
600 ns |
Quiescent Current |
300μA |
Response Time |
600 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
93.98dB |
Power Supply Rejection Ratio (PSRR) |
70dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Hysteresis |
2mV |
CMRR, PSRR (Typ) |
70dB PSRR |
Current - Output (Typ) |
73mA @ 5V |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMX339AUD+T Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.There is a Open Drain output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 4 elements.A total of 14 pins are included.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator has a pin count of 14 .You may wish to search LMX339 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 300μA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 300μA for normal use.The compartator could be damaged if the current supply exceeds 300μA .The device can be powered by 3/5V power supplies.You are allowed to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 93.98dB .
LMX339AUD+T Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMX339AUD+T Applications
There are a lot of Maxim Integrated LMX339AUD+T linear comparators applications.
- Building automation
- Window Comparators, Multivibrators
- Security Detection Systems
- General Purpose Low Voltage Applications
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- High-Speed Differential Line Receiver
- Wireless Base Stations
- Motor drives
- Wide Range VCO; MOS Clock Timers