LMX393AKA+T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 714mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMX393 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 73mA |
| Max Supply Current | 200μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 200μA |
| Response Time | 600 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 70dB PSRR |
| Current - Output (Typ) | 73mA @ 5V |
| Height Seated (Max) | 1.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMX393AKA+T Overview
For convenience, it is packaged in SOT-23-8 .A comparator with an output type of Open Drain is being used.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .8 pins are available on the comparator.Alternatively, you may search for LMX393 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 200μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 200μA .The compartator could be damaged if the current supply exceeds 200μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Input current to the device cannot exceed 250nA .From the voltage formula, the voltage gain of the part is 93.98dB .
LMX393AKA+T Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
LMX393AKA+T Applications
There are a lot of Maxim Integrated LMX393AKA+T linear comparators applications.
- Threshold Detectors
- Power Supervision
- Analog front end
- Laptop Computers
- Alarm and Monitoring Circuits
- DC/DC and AC/DC power supplies
- Wireless Base Stations
- Portable and Battery-Powered Systems
- Infotainment & cluster
- Battery management and protection
