LMX393AUA+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 825mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMX393 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 73mA |
| Max Supply Current | 200μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 200μA |
| Response Time | 500 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 73mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 70dB PSRR |
| Current - Output (Typ) | 73mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
LMX393AUA+ Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type Open Drain is used for this comparator.This package has been designed with Tube .The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator consists of 8 pins.Alternatively, you may search for LMX393 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 200μA .A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 200μA .A supply current exceeding 200μA may result in the comparator malfunctioning.The device can be powered by 3/5V power supplies.There is a maximum current that can be input into the device of 250nA .From the voltage formula, the voltage gain of the part is 93.98dB .
LMX393AUA+ Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
LMX393AUA+ Applications
There are a lot of Maxim Integrated LMX393AUA+ linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Infotainment & cluster
- Hand-Held Electronics
- Portable and Battery-Powered Systems
- Battery-Powered Electronics
- Window Comparators
- Point of load regulators
- Factory automation & control
- Handheld Instruments
- Window Comparators, Multivibrators
