Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
714mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LMX393 |
Pin Count |
8 |
Output Type |
Open Drain |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
200μA |
Output Current |
73mA |
Max Supply Current |
200μA |
Propagation Delay |
600 ns |
Quiescent Current |
200μA |
Response Time |
600 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
93.98dB |
Average Bias Current-Max (IIB) |
0.004μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Hysteresis |
2mV |
CMRR, PSRR (Typ) |
70dB PSRR |
Current - Output (Typ) |
73mA @ 5V |
Height Seated (Max) |
1.45mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMX393HAKA+T Overview
The product is packaged in SOT-23-8 to facilitate transportation.Output type Open Drain is used for this comparator.We ship the part through Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 2 elements in total.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search LMX393 for more options.There is 200μA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 200μA supply current.The compartator could be damaged if the current supply exceeds 200μA .In order to run the device, there are only 3/5V power supplies required.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 93.98dB .
LMX393HAKA+T Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
LMX393HAKA+T Applications
There are a lot of Maxim Integrated LMX393HAKA+T linear comparators applications.
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Ultra-Low Power Systems
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
- Set Top Boxes
- Battery management and protection
- Power management
- Factory automation & control
- General Purpose Low Voltage Applications