LMX393HAUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 825mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMX393 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 73mA |
| Max Supply Current | 200μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 200μA |
| Response Time | 600 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 70dB PSRR |
| Current - Output (Typ) | 73mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMX393HAUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type Open Drain output on this device.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .A comparator of this type is typically of type General Purpose .Currently, it consists of only 2 elements.There are 8 pins on this board.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.Electronic comparator has 8 pins.Alternatively, you may search for LMX393 to find more pin-to-pin solutions for your specific needs.A quiescent current of 200μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 200μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 200μA .The device can be run with 3/5V power supplies.From the voltage formula, the voltage gain of the part is 93.98dB .
LMX393HAUA+T Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
LMX393HAUA+T Applications
There are a lot of Maxim Integrated LMX393HAUA+T linear comparators applications.
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Battery-Powered Electronics
- Infotainment and Clusters
- Motor drives
- Automotive
- Window Comparators
- Portable and Battery-Powered Systems
- Security Detection Systems
- Laptop Computers
