LNK302DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 68μA |
| Output Current | 63mA |
| Topology | Buck, Buck-Boost, Flyback |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LNK302DG Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.Surface Mount is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 66kHz , the circuit is closed.It has a total of 8 terminations.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 8 pins.A member of the LinkSwitch?-TN manufacturer family, it has the following characteristics.There are 1 outputs to be processed.63mA is set as the output current.There is 12V output voltage from this AC/DC converter.Also, REQUIRES AN AC SUPPLY OF 85 TO 256V can be found using this ACDC converter.A minimum voltage supply across the converter is 85V .There is 265V maximum supply voltage across the converter.
LNK302DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 63mA
LNK302DG Applications
There are a lot of Power Integrations LNK302DG AC DC Converters applications.
- PDAs
- ATX/BTX Auxiliary Power
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Appliance Power Supplies
- Battery Chargers
- Switching AC-DC Adapter
- Adaptors for Portable Media Player
- Power tools
- Battery chargers for cordless
- LED lights
